Faceplates pre-loaded with Cat5e UTP Modules. Available with 1 or 2 or 4 modules

The Connectix Enhanced Category 5 loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. Ready assembled outlet, ready for installation. Exceeds Enhanced Category 5 specification when used alongside our cable and patch panels Details://   Module DetailsThe Connectix Enhanced Category 5 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive... More Info

Faceplates pre-loaded with Cat6 UTP Modules. Available with 1 or 2 or 4 modules

The Connectix Enhanced Category 6 way loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. Ready assembled outlet, ready for installation. Exceeds Enhanced Cat6 specification when used alongside our cable and patch panels Details: Module DetailsThe Connectix Category 6 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive high gloss finish and easy to... More Info

Right Anglled 24 Cat6 ports in 1u of space

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination andcable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds the... More Info

24 Port UTP RJ45 Through Coupler Patch Panel - save the time of punching down

Connectix Through Coupler Panels offer Enhanced Category 5 system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to facilitate through coupling. Features: High density, 24 ports in 1u Enhanced Category 5 system performance RJ45 to RJ45 connection   Specifcation: Width - 483mm (19”) Depth - 35mm Height 24 way - 1u (44mm)... More Info

Punchdown tool for terminating on Krone Style IDCs

The Connectix Cabling system Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

UK Mains (BS 1363) Plug to IEC 60320 C13 - 5amp Fused

These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features: UK BS 1363 Plug Fused with a 5amp fuse IEC 60320 C13 Female Connector Available in 1mt, 2mt, 5mt & 10mt More Info

Cat5e UTP PVC Solid Cable Available on a 100mt Reel

CCS Cat5e UTP Cable is designed for high speed LANs including Gigabit Ethernet applications. When used with CCS Cat5e patch panels and modules it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 100mt Reels. Cat5e UTP PVC Cable Details: Features: Suitable for Gigabit Ethernet applications PVC outer sheath Supplied metre marked Pure copper cores Excellent performance exceeding ANSI/TIA Cat5e specifications More Info

Cat6 Contractor Pack

Our Cat6 Contractor pack includes - 1 x 24 Way Cat6 UTP Patch Panel 12 x Single Gange Faceplate loaded each with 2 modules 1 x Cable Management Bar. The kit comes supplied in a handy box. More Info

Kit Includes RJ45 Crimp tool, Cat6 Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cat6 Cables & Testing the finished leads. (cable not included)Kit includes: 1 x RJ45 Crimp Tool 1 x Cable Stripper 1 x Contunity Tester 100 x Cat6 RJ45 Plugs 100 x Strain relief boots (select colour above) More Info

UK Mains (BS 1363) Plug to IEC 60320 C19

These UK to IEC C19 leads are ideal for connecting between wall sockets or PDU's to Servers, Switches, UPS's and other equipment with a C19 Male Connector. Features:UK BS 1363 Plug IEC 60320 C19 Female Connector Available in 2.5mt & 5mt More Info

Kit Includes RJ45 Crimp tool, Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cable & Testing the finished leads. (cable not included) More Info

The Connectix LJ6C Compact Module range is designed to provide one of the shallowest outlets on the market. They are the ideal solution wherever back box depth is a problem. LJ6C Modules are ideal for use in floor boxes, or any application that has an industry standard LJ6C aperture.Single and dual gang faceplates are available for up to four LJ6C modules in addition to panels suitable for Ackerman Floor boxes. Their attractive high gloss finish and easy to use labelling system makes them popular with both installers and users... More Info

Get ahead of the competition with Connectix Online Training Sessions.

Get ahead of the competition with Connectix Training Sessions This is a 1 day course, with both the Theory and the Practical elements being completed either at our headquarters in Braintree, Essex . Theory Overview Correct installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC and EIA/TIA. Modern building designs often include consideration... More Info

Internal/External Ruggerdised MTP Trunk Cables fitted with MTP connectors at...

Intex pre-terminated assemblies are an innovative evolution of the popular Starlight MTP assemblies. The unique connector housing (patent pending) not only prevents damage to the connector during installation, but also provides a rugged pulling eye. Then, once installed, the cap incorporating the pulling eye can be removed and the housing becomes a permanent protection cover for the MTP connector, locking onto specially designed panel mount bulkheads with a simple twist action. The integrated strain relief gives the added benefit of allowing... More Info

MTP Fanout Cables fitted with MTP connectors at one end and LC or SC...

The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels. Assemblies are available in 12 & 24 fibres, and micro and ruggedised cable in multimode OM1 62.5/125, OM2 50/125, OM3 50/125, OM4 50/125 and singlemode OS1 9/125 options. The Starlight® System is... More Info

MTP Cassette For Use With Unloaded MTP Cassette Patch Panels

The Connectix Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. The Starlight® Modular Panel and cassettes have been designed to simplify installation, and offer users an easy to expand modular system. Starlight® modular panels can accept 4 or 10 unloaded cassettes, which are simply inserted and locked into the panel by push/pull pins. For upgrading or maintenance purposes, cassettes can be easily unlocked and removed from the... More Info

MTP Fibre Cassette Patch Panel to Hold 4 MTP High Density Cassettes

The Starlight® Modular Panel and cassettes have been designed to simplify installation, and offer users an easy to expand modular system. Starlight® modular panels can accept 4 cassettes, which are simply inserted and locked into the panel by push/pull pins. More Info

Fibre Break Out Box, Available with 4, 8, 12, 16 or 24 ST Simplex Adapters

The Starlight™ range of wall mountable break out boxes are designed to provide a cost effective method of patching or splicing in situations where equipment racks or cabinets are not available. The boxes can be supplied fully loaded with all common adaptors including ST, SMA, SC, FC, SC Duplex, FDDI and ESCON types. They are supplied in a number of popular formats including 1in/1out, 1in/2out and 2in/2out. We provide a custom machining service enabling us to supply any other splice box configuration or hybrid enclosures on very short lead... More Info