Cabinet Accessories (181 products)
Inside Cabinet Accessories
Rack PDU 2G, SWITCHED, ZEROU, 5.7KW, 200/208V, (21) C13 & (3) C19
Network ManagementFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up... More Info
Our Vertical Cable management offers an ideal way to keep your cabling tidy with maximum airflow.The metal frames fit between the profile and the side of the cabinet and are only suitable for 800mm wide Floor Standing Cabinets/ Server Cabinets. They will not fit into 600mm wide cabinet.For use in 800mm Wide Cabinets Choose the size which fits exactly into Cabinet Black Finish Excellent Air flow management More Info
Rack PDU 2G, Metered, ZeroU, 20A, 208V, (18) C13 & (2) C19, L620 Cord
Remote Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Local Current Monitoring DisplayThe aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local... More Info
Racky Rax Fan Trays are designed to keep networking equipment cooler by increasing airflow through the cabinet.Specially designed to fit on the roof of Racky Rax Floor cabinets, the Fan trays come complete with either two or four high quality, low noise fans; and are powered via a standard UK 240V plug.The 2 way RR-FT-2 is for use in 600 by 600 mm or 800 by 600 mm Floor Standing cabinets; the 4 way RR-FT-4 is for 600mm by 800mm or 800 by 800mm server cabinets and the Large 4 way RR-FT-14 is for 800 by 1000 mm server cabinet.Features &... More Info
RACK PDU 2G, METERED, ZEROU, 30A, 200/208V, (36) C13 & (6) C19
Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles,... More Info
2/4-Post Static Rack Rails Kit
The ReadyRails™ static rail kit for 2U Systems, including PowerEdge R720 provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all generations of Dell racks. It also supports tooled mounting in 4-post threaded racks and 2-post (Telco) racks for added versatility. The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. This product has been tested and validated on Dell systems. It is supported... More Info
Fixed Vented Data Cabinet Shelf for Rax Server Cabinets - Suitable for 1000mm...
Server Cabinet Shelf, suitable for use in the Rax range of Server Cabinets. The shelf is rated up to 60kg and vented to allow vertical airflow. More Info
19" horizontal cable tidy panel to help maintain neat cabling in 19" Racks...
The Connectix Cabling System Cable Tidy Panel enables the neat routing of cables within a 19" rack. This panel comes complete with 4 horizontal rings. Details: These Cable Management Panels are designed to give extra support for patch leads and prevents obscurring other equipment. These Panels are designed to prevent cable strain. Makes installation neater and more professional More Info
Cabinet 19" brush strip panel
Brush Strip Panels are used to allow the passage of patch leads from the front of a cabinet to the rear whilst maintaining a neat appearance and reducing front to back air flow. More Info
Rack PDU 2G, Metered, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19
APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load... More Info
Cantilever Shelf for Wall Mounted Data Cabinets
Cantilever Shelf designed to fit in the RackyRax Wall Mounted Data Cabinets. Mounting on the front profile to provide a sturdy base to sit your equipment. - Front Profile fixing only- 1U Height More Info