Fibre Networking (125 products)

Fibre Curly Clips - Sold Individually

Great cable management Self Adhesive Sold Individually More Info

Fast Evaporating pre-Moistened swabs, individually wrapped

Sold in Pack of 100 individually small wrapped Fast Evaporating Single Use Pre-Moistened swabs Ideal for removing dirt, dust and oil Approximate size - Folded 30mm x 30mm, unfolded 30mm x 60mm Absorbant fibre-free swabs, contains 70% (IPA) Alcohol Small in size, these are not large handwipes More Info

SC Loaded Fibre Patch Panel with Splice Management

This Starlight™ SC Fibre Patch Panel is available with a range of port densities. The fibre patch panels are manufactured from mild steel and finished in a black powder coating. They are suitable for mounting in 19" cabinets. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Fibre Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connect or... More Info

Pre-Terminated Multi-Core Fibre Cables Made with either SWA or CST Loose Tube...

Starlight have developed a cost effective pre-terminated cabling system called OPAL™ (Optical Pre-Assembled Link) which is completely based around standard networking products. The system allows a fibre optic network to be installed in a fraction of the time taken by conventional on-site direct termination or fusion splicing. It requires no special installation skills or equipment, and can therefore be installed by non-specialist personnel, vastly reducing the installation cost. The system consists of SWA or CST armoured loose tube fibre... More Info

LC Fibre Connector, available different fibre sizesSX= Simplex DX =Duplex

The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC was also the first Small Form Factor (SFF) connector set available and offers fibre density and performance unheard of before now. The LC connector uses a 1.25mm ferrule, half the size of the ST. Otherwise, it is a standard ceramic ferrule connector and its good performance makes it highly favoured for singlemode... More Info

ST - SC Fibre Patch Leads, Available in Multimode Options, OM1, OM2 & OM3

Our range of Starlight™ ST to SC fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for super fast data applications. These ST - SC FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125) and OM3 (50/125) specifications.Our fibre cables are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service for all types of... More Info

Fibre Patch lead terminated with ST connectors at one end and SC at the...

Our Singlemode fibre patch leads are manufactured are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service for any length singlemode lead. If you require a length that is not shown, email in and we can send over a quote. ST-SC Fibre Lead Details Features: 100% tested... More Info

Available up to 24 Way, choose the adapter type from the drop down.Please...

Fibre Fox Pro Patch Panel available loaded with Singlemode or multimode adapters.The robust design of this panel makes this patch panel the ideal Fibre installers choice. Internal Fibre Management Port ID internal & External Internal Fibre Management Front Latched Cover PLease note unless otherwise agreed, the pro Patch panel does not come loaded with the fibre Pigtails, these pictures are to show how the panel can be populated. More Info

MTP Trunk Cables fitted with MTP connectors at each end, made to your...

The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels. Assemblies are available in 12 & 24 fibres, and micro and ruggedised cable in multimode OM2 50/125, OM3 50/125, OM4 50/125 and singlemode OS1 9/125 options. The Starlight® System is manufactured in our own... More Info

Epoxy tool kit provides all the essential tools needed for terminating with...

Our epoxy tool kit provides all the essential tools needed for terminating with either ST, SC or FC epoxy style fibre connectors. The kit includes: Carbide Scribe tool Universal Crimp tool Rubber Polish pad Glass Polish plate Syringes x5  Universal polish puck 0.3 um Polish film x5 1.0um Polish film x5 5.0um Polish film x5 4gr blue epoxy glue Universal Microscope Installation instructions for ST, SC & FC connectors This kit does not include a Fibre Cure Oven More Info

Xp-Fit Field Termination Kit XPF-P-F

No epoxy, polishing film, or other consumables are required, and there is no need for electrical power, allowing installers to get in and out ofinstallation sites quickly Features: Fast installation to minimize osite labour costs Easy operation Quick assembly in under 2 minutes No adhesive or polishing required Compact tool without electrical power Kit Includes: Inner Cable Jacket Stripper + 125µm Buffer Remover Thermal Buffer Removal Tool Replacement Blade Set Precision Cleave Tool (Flat) Lint Free Dry Wipes Fiber Optic Cleaning Pen Kevlar... More Info

Singlemode FC Connector 1.8mm

The FC Connector is used extensively in the telecommunications market, where long singlemode optical fibre cables can run upwards of 50km. In these extreme situations the connector needs to have extremely low loss and accurate geometry. The FC Optical Fibre Connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. The connector is precision made and manufacturedto demanding specifications. The combination of a ceramic ferrule and a precision nickel plated... More Info