Power Distribution Units (87 products)

Rack PDU 2G, Switched, ZeroU, 20A, 208V, (7) C13 & (1) C19, L620 Cord

Network ManagementFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up... More Info

Basic, 1U, 16A, 208V, (12)C13

Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.Single input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having... More Info

C19/C20, 0.6m, Black, 16A, 6 pcs

Low profile cord designed to eliminate space interference when accessing removable hot swap blade modules. More Info

Power Cord Kit, 16A, 208/230V, C19 TO C20R, 4FT, 3L + 3R

Low profile cord designed to eliminate space interference when accessing removable hot swap blade modules. More Info

UK Mains (BS 1363) Right Angled Plug to IEC 60320 C13 - 5amp Fused

These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features: UK BS 1363 Plug Fused with a 5amp fuse Right Angled IEC 60320 C13 Female Connector Available in 2mt More Info

Rack PDU, Switched, Zero U,12.5kW,208V,(21)C13&(3)C19; 10' Cord

-Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).-High Power Density.-Local and web-based monitoring: Status available to customers both in the data center and remotely.-Power Sequencing.-Redundant Internal Power Supplies.-Remote Current Monitoring.-Toolless mounting capability.-Vertical mounting capability. More Info

Power Cord Kit (6ea), Locking, C13 to C14 (90 Degree), 1.8m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.Includes:3 Left-angle jumper cords, 3 Right-angle jumper cords More Info

Rack PDU 2G, ZeroU, 20A/208V, 16A/230V, (21) C13 & (3) C19

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load... More Info

Rack Power Distribution Unit with BS 1363 UK Sockets & 16Amp C16 Commando...

A full range of high quality BS1363 UK outlet Power Distribution Units Key Features:Robust all aluminium housing BS1363 UK Sockets External earth facility Choice of standard and filtered solutions with input plug variantsPLEASE NOTE DESIGN OF THE FILTERED PDU's WITH THE PART CODE STARTING PDU- WILL VARY IN DESIGN.  More Info

Rack Power Distribution Unit with IEC 320 C13 Sockets and IEC 60320 C20 Plug...

A full range of quality Power Distribution Units with IEC 60320 outlet configurations. Available in many different outlet configurations and with many input options. Other features include adding a quality ammeter for RMS current measurement.Key Features: Robust all aluminium housing IEC 320 C13 sockets External earth facility Input lead terminated with a C20 plug Unit overall rating: 13A, 250V CE/EN60950 Up to 12 Way can fit Horizontally in Data Cabinet PLEASE NOTE - PDUs with the DIGITAL AMMETER are Made to order. If this item needs... More Info

Rack Power Distribution Unit with IEC 320 C19 Sockets and 32Amp C32 Commando...

A full range of quality Power Distribution Units with IEC 60320 C19 outlet configurations. For application that require the added current capacity available with the C19 outlet. Available with many outlet configurations and input options. Other features include adding a quality ammeter for RMS current measurement. Key Features:Robust all aluminum housing IEC 320 C19 sockets External earth facility Unit overall rating: 32A/16A, 250V Choice of standard and filtered solutions with input plug variants CE/EN60950 More Info

Rack PDU, Basic, 1U, 14.4kW, 208V, (6) C19

-High Power Density.-Horizontal mounting capability. -Rack-Mountable: Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.-Single input power source: Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.-Wide range of input and output connections: Product family includes a variety of input and output connections to... More Info