Categories

Excellent

4.83 / 5

9429 Reviews

John

Used these guys for a number of years, always good products, good value and good customer service. What more do you need.

Michael

Ordered cable from wide selection, it arrived correct and timely and undamaged. Cable now working well, job done.

Rick

Used CM a number of times. Always good product, fairly priced, dispatched and delivered quickly - usually a day ahead of expectation.

Read all reviews.

More Info
Spec Sheet

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat 6 UTP & FTP Pass Through Plugs.
With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.

- For use with RJ45 Pass through plugs
- Can be used to cut outersheath of cable

See below for the 4 step 'Easy' Instructions


1	Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.

2	Arrange wires into the correct colour code sequence (most commonly TIA 568B). Slot cable into the plug pushing the wires through. Outer sheath of cable should sit inside the plug as far up as possible.

3	Press the ‘Lock’ Button on Crimp tool to open it ready for use. Insert the loaded RJ45 plug into the socket and squeeze the handle to crimp the plug, the excess wire will also be trimmed at the same time.

4	If you have followed the instructions you should now have a fully working RJ45 Connection.