Categories

Excellent

4.83 / 5

9478 Reviews

Alan

good looking and feel quality cables - replacing a few fraid old cat 4/5 etc with them and no prolems with them whatsover. I should have purchased also cat7 but bought two ear;ier from another ation supplier - the cables from them were multiple S folded and a pain to ease through 30mm ducting i have around my home/office set up ...whereas CM cables were all rolled as pe normal cable and therefore neat to use straight out of the bag.

Anonymous

Large range of networking products and rapid delivery. All good.

Chris

Very good kit !!

Read all reviews.

More Info
Spec Sheet

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat 6 UTP & FTP Pass Through Plugs.
With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.

- For use with RJ45 Pass through plugs
- Can be used to cut outersheath of cable

See below for the 4 step 'Easy' Instructions


1	Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.

2	Arrange wires into the correct colour code sequence (most commonly TIA 568B). Slot cable into the plug pushing the wires through. Outer sheath of cable should sit inside the plug as far up as possible.

3	Press the ‘Lock’ Button on Crimp tool to open it ready for use. Insert the loaded RJ45 plug into the socket and squeeze the handle to crimp the plug, the excess wire will also be trimmed at the same time.

4	If you have followed the instructions you should now have a fully working RJ45 Connection.