Excellent

4.8 / 5

8854 Reviews

Zaneta

Product as described

Stuart

I was delighted when the cable arrived and well protected. I had to convert an old 1960s coffee pot to work on today's electric and found cable monkey which had the exact lead I needed.

Guy

Great range of quality stock and speedy turnaround. Thanks Cable Monkey

Read all reviews.

More Info
Spec Sheet
Reviews

1 Pot = 100 plugs
1 Box = 20 Pots

Our 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts.

For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps

Features & Benefits

Easy to verify RJ45 568A or 568B colour code
Gold Plated Contacts
For best results use Connectix Easy RJ45 Crimp Tool
Cat6 Performance

See below for the 4 step 'Easy' Instructions


1	Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.

2	Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer sheath of cable should sit inside the plug as far up as possible.

3	Press the ‘Lock’ Button on Crimp tool to open it ready for use. Insert the loaded RJ45 plug into the socket and squeeze the handle to crimp the plug, the excess wire will also be trimmed at the same time.

4	If you have followed the instructions you should now have a fully working RJ45 Connection.

Cat 6 UTP Easy Plugs

Download (698.24k)

Wojciech W - 06/02/2021

Works as intended and good quality.

Paul L - 30/12/2020

Not used yet

Ioan D - 15/11/2020

As a new amateur I have had a few problems using Cat6 cable and connectors, partly due to the cheap RJ45 crimper not properly registered with the terminals. However, I decided to buy the Easy RJ45 Crimp Tool and these connectors, worked first time!! Very pleased, but fiddly to wire initially but this gets easier after you have done a few. Strongly recommended.