The SC adaptor is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet. 

Connectix Through Coupler Panels offer Category 6 system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to facilitate...

Armoured external Enhanced Category 5 UTP Cable, designed for external and direct burial. Cable is cut to length, we have a minimum order quantity of 50mt. When used with Connectix Enhanced Category 5 panels and modules it gives the exceptional performance required for transmission over all four pairs. Armoured Cat5e Cable Details: Features:...

RJ45 Boots to provide strain relief and latch protection on RJ45 CablesThese Boots are suitable for use with Cat5e, Cat6 UTP & Cat6a Stranded Cable. They can also be used on Cat5e & Cat6 UTP Solid Cable.The Boots do not fit onto Cat6 FTP or Cat6a Solid Cable.Our extra wide boot is - 006-003-008-29The style of boot may vary from that...

The Connectix 12 port voice panel comprises of 3 separate units that have single output at the rear, which is distributed to 4 outputs at the front. This allows up to 4 extensions to share a single phone line. Features:The units can be connected together giving the option of 8 or 12 extensions from a single line,

The Keystone Jack adapter is compatible with Cat 5e, Cat 6 and Cat 6a keystone modules. One Fascia is required for each module used in a faceplate.For use in Euro size Faceplates

These fixed shelves are dsigned to fit the CCS range of floor standing Data Cabinets and Data Racks.They are ventilated to help with bottom to top airflow in the rack.Load rated up to 60kg.

The Connectix 2020 Series Patch Panel is an alternative to The Enhanced Category 5e High Density Panel. It offers the same Enhanced Category 5e performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. Connectix...

The Connectix Shuttered Keystone LJ6C Fascia is compatible with Cat 5e, Cat 6 and Cat 6a keystone modules. One fascia is required for each module used in a faceplate. They have been designed to be used with most Euro Module Keystones. Quick and easy to install Easy to use reignition label Snap-fit to terminate Suitable for all standard Keystone...

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat 6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cable See below for the 4 step 'Easy' Instructions 1 Remove...

High Quality 2 Wire telephone Jelly Crimps. Simple to use and quick to terminate.

Connectix Server Cabinets have been designed to offer the optimum housing for servers and networking hardware. Mesh front and rear doors plus a vented roof add up to offer maximum ventilation; whilst the lockable doors all round provide essential security. All doors are fully removable with quick release hinges for easy equipment installation,...