Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding...

Will fit into any CCS Faceplates Gives a neat and tidy finish, if you dont have enough modules to fill a faceplate Two 1/4 blanks equal the size of one module Pack contains 1 quarter blank

A full range of quality Power Distribution Units with IEC 60320 C19 outlet configurations. For application that require the added current capacity available with the C19 outlet. Available with many outlet configurations and input options. Other features include adding a quality ammeter for RMS current measurement. Key Features: Robust all...

Dual hole strippers suitable for stripping 250um coated loose tube and 900um buffer tube. This simple tool has extremely accurate hardened jaws that remove the buffer without scratching the fibre. The tool has a spring action that ensures that the blades return to the open position when not in use

Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding...

Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act)

A full range of quality Power Distribution Units with IEC 60320 C19 outlet configurations. For application that require the added current capacity available with the C19 outlet. Available with many outlet configurations and input options. Other features include adding a quality ammeter for RMS current measurement. Key Features: Robust all...

Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding...

*Please Note* This cabinet is currently supplied without a back plate (as shown in the picture)The compact design of the Racky Rax 8u Cabinet makes it the ideal housing for small network requirements, allowing integration of voice, data, ISDN and internet connections in one neat unit. The cabinet has been designed to fit perfectly into both the...

Designed to be the ultimate in optical fibre connectors, the E2000 connectors exceed all standards for performance and operation. These made-to-order E2000 leads are available in all fibre types and also with LC or SC connectors at the other end. The E2000 connectors are available in both multimode and singlemode options. Options: Length -...

Cat6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Cat6 UTP Solid Cable offers the performance characteristics required by the ever present Cat6 Standard. When used in conjunction with Connectix Cat6...

The Connectix Cabling system flat blade screwdriver is the perfect tool for using with faceplate screws