Please note: adding locking side panels to your cabinet may increase your delivery time.Our range of 600mm wall mounted data cabinets have been designed with ease of installation and maintenance in mind. The high specification of the cabinet means it's suitable for almost any data comms or voice networking installation. The data cabinets are...

The compact design of the Rax 19” Wall Mounting Cabinets make them ideal for smaller networks and workgroups. The cabinets are available in various sizes and are supplied fully assembled. Each cabinet comprises a welded steel frame and adjustable front 19” mounting profiles. A gland plate is situated in the top and bottom of the cabinet. The...

- Increased cable (length 2m)- for connection between UPS 9130 1000VA and EBM

- Height Adjustable Stand - Compatible with 19" ~ 22" monitors- VESA 100 x 100 and 75 x 75 mm- 4 in 1 Function: Height Adjustable 110mm / Tilt: -5°~ 19 ° / Pivot: 90° / Swivel 30° Left ~ 30° Right

The HP Z6 G4 Memory Cooling Solution can be installed on any HP Z6 G4 Workstation configuration for improved system acoustics, but it is required on HP Z6 G4 Workstations with dual-processor configurations and configurations with greater than 32 GB total system memory.

These castors are the ideal solution for moving, siting and holding your cabinet.  Load rated up to 600kg evenly distributed

The VESA-compliant DDR1327S Full Motion Desk Mount Clamp attaches to your desk, table or workstation, allowing you to mount a monitor above it and free up valuable workspace. Ideal for home and office, the DDR1327S fits most flat-panel displays from 13 to 27 inches. The swivel arm can be independently adjusted for angle and height to give you...

First hard drive capable of being managed in the cloudOFFERING SECURITY, PERFORMANCE AND MANAGEABILITY AT A VALUEIronKey's next-generation External Hard Drive features USB 3.0 performance and cloud-based or on-premise management capabilities to enable the most demanding enterprises and government agencies to safeguard up to 1TB of data. From one...

Easy to use, lightweight and designed to fit in the pocket the Senko Smart Power Meter is used in conjunction with the Smart Source to test and certify a fibre link. It is available in both a singlemode (1310/15550nm) and multimode version (850nm). As standard the meter will accept a 2.5mm ferrule connector such as SC, FC, ST. Optional...

No epoxy, polishing film, or other consumables are required, and there is no need for electrical power, allowing installers to get in and out of installation sites quickly Features: Fast installation to minimize osite labour costs Easy operation Quick assembly in under 2 minutes No adhesive or polishing required Compact tool without electrical...

Our Basic termination tool kit provides the user with a whole range of basic tools that are essential for fibre optic termination, splicing & testing. This tool kit is not a termination kit, it is a tookit that includes all the most commonly used tools and consumables. The Kit comprises of the following: 8 bit screwdriver Fibre stripper...